Question: How To Start Your Swagger 5 Electric Scooter?

How do you turn on the light on a Swagtron scooter?

There is a single button just under the display of the Swagger 5 that is to power the scooter on, control gear, and turn the lights on.

How do you reset a Swagtron scooter?

Hold down the power button for 10 seconds and you should hear a beep, and led lights should start flashing. The hoverboard battery will not be reset it will be simply replaced.

How long does it take for a Swagtron scooter to charge?

The charging time is approximately 1.5 hours. Charging longer than that may affect battery life and/or performance. If the charger’s light doesn’t turn on, it may not be fully connected. Check that it is securely connected to the wall and to the scooter.

Is the swagger 5 water resistant?

Is the Swagger 5 waterproof? As with previous Swagtron e-scooters, they don’t have an IP waterproof rating, meaning it’s not waterproof. It might be water resistant from small splashes and light rain but for your own safety make sure to keep it from getting wet.

You might be interested:  Question: How To Improve Electric Scooter Performance?

How do you turn the headlights on a electric scooter?

Working the lights To turn on the lights, press the power button once. Pressing the brake lever will make the rear light flash. To turn off the lights, just press the power button again.

Why is my electric scooter not working?

Check the battery and charger. If the electric scooter does not run check the motor because the motor is the power source. Because of excessive riding or doing stunts may cause the problems. If the indicator does not work properly change the charger and then try again.

How do I reset my electric scooter?

Problem 3: How Do I Reset My Electric Scooter?

  1. Place your electric scooter on a level, flat surface.
  2. Turn off the scooter and wait for about 5 minutes.
  3. Press the ‘ reset ‘ button to switch it on again.
  4. Now, the power switch should get illuminated, and it should work smoothly.

How do I know if my SwagTron is charging?

When the indicator light changes from red to green, the battery is fully charged.

How do you turn on a swagger scooter?

The Swagger 5’s display features several different elements. Be sure you understand these before attempting to ride. Press and hold the power button approx. 3~5 seconds to turn the scooter on/off.

How do you open the Streak board on a scooter?

Push and Pull to Fold There is a button at the bottom of the scooter for folding. When you push and pull there, you can complete the folding and unfolding.

How long does Swagtron battery last?

It was super easy to use and they turned into expert riders in minutes. Here is the thing we don’t care forthe battery only lasts for 40 minutes and then you have to charge it again for 2-3 hours.

You might be interested:  Which Electric Scooter Is Safest?

How do you charge a Swagtron?

Connect your charger to the wall and make sure the green indicator lights up on the charger box before you connect it to the hoverboard. Make sure that when you plug your Swagtron in to charge, the power button on the side of the board’s power box is in the OFF position.

Related posts

Leave a Comment