Often asked: How To Change Rear Tire On Razor Electric Scooter?

How do you take the back wheel off of an electric scooter?

Removing the rear wheel of the scooter

  1. Position the scooter so you can work on it comfortably, fold it and place it upside down or on its side (disc side down) on a work-surface.
  2. Take a scalpel or pick and remove the plastic trim strip (the whole piece, not just the top red sticker label) from the rear screw cover.

How do you change the back tire on a Razor Pocket Rocket?

REAR TIRE /INNER TUBE REPLACEMENT INSTRUCTIONS Clamp two 8mm (or similar 5/16) bolts in line with the brake drum holes as shown below. Deflate the inner tube completely and with the brake drum removed, loosen and remove the 4 screws that hold the wheel together. Replace inner tube/ tire. Reverse steps to reassemble.

Can you replace Razor scooter wheels?

When you ‘re ready to replace worn out wheels on your favorite kick scooter, these replacements will get your scooter rolling like brand new. Razor Kick Scooter Replacement Wheels are compatible with the following Razor Kick Scooters: A, A2 A4, Spark, Spark 2.0 and A Sweet Pea.

How do I fix my electric scooter?

If the Motor Does Not Run Follow the Following Steps

  1. Make Sure the power switch is on.
  2. Check the fuse or circuit breaker.
  3. Try pushing the scooter to start.
  4. Try charging the battery pack for full hours.
  5. Inspect the motor by sight, touch and smell.
  6. Test the fuse or circuit breaker and also the brake lever switch.

Related posts

Leave a Comment